MAXON OD9PRO+ OVERDRIVE PRO+
MAXON OD9PRO+ OVERDRIVE PRO+ 1

MAXON OD9PRO+ OVERDRIVE PRO+

Regular price$239.00
/
Shipping calculated at checkout.
  • FREE 2 DAY SHIPPING ON MOST PRODUCTS
  • 30 DAY SATISFACTION GUARANTEE
  • HASSLE FREE RETURNS
  • In stock, ready to ship
  • Backordered, shipping soon

The Nine Series Overdrive Pro+ takes Maxon's classic OD-9 circuit and serves it up with 9/18 volt operation and a Mid Boost switch. In 9-volt setting the Pro+ sounds and functions like the standard OD-9 with the added option of a healthy +3 dB of midrange boost at approximately 800 Hz (actual frequency is dependent on Control settings) - great for cutting through a band during solos. When set to 18-volts the OD-9 Pro+ becomes an 800-pound Gorilla, offering up beefier lows, tighter saturation, improved dynamics and a chunky, aggressive pick attack. Switch on the Mid Boost in this mode and let your solos breathe fire. Don't just play like the pros - play with the Pro Plus.

The OD-9 Pro+ starts with a jFET buffer which simultaneously offers high input impedance and low impedance into the rest of the pedal - this helps to preserve high-end clarity in the signal. The first tone stage is the Mid Boost feature: A switchable Op Amp with clipping diodes in the feedback loop. When this stage is not in the signal path the pedal behaves like a standard OD9. With this stage in the path it adds subtle gain and definition to the sound, similar to a cascading gain stage. From here it's on to the standard OD-9 circuitry: A clipping Op Amp with diodes in the feedback loop that clip the signal gradually as well as a high pass filter that keep the low frequencies from being distorted as much as high. Next there comes a passive LP filter and then an active tone stage. After the tone stage it's through the Volume pot, an Op Amp boost stage which bumps the signal 3X and then sends it to the output. The Pro+ also utilizes an NJM2374A voltage conversion chip that changes the 9V power input into 9V+ and 9V-, increasing the headroom of the Op Amps (9V to 18V swing) and giving a bigger, chunkier sound to the overdrive. The OD-9 Pro+ features Mechanical True Bypass switching via a Fujisoku 4PDT switch - Input is switched to ground when bypassed.

Features

  • Overdrive based on classic OD-9
  • Switchable 9- or 18-volt operation (runs on 9 VDC)
  • More Gain and Low-End (18-volt setting)
  • Mid Boost Switch add +3 dB @ 800 Hz
  • NJM4558 (JRC) Op Amp
  • True Bypass Switching

Input1/4" mono jack, Impedance 500K Ohms
Output1/4" mono jack, Impedance 10K Ohms or less
ControlsDrive, Tone, Level, Boost/Normal switch
Power9V DC, 27 mA, center pin minus
Dimensions(WxDxH) 74 mm x 124 mm x 54 mm
Weight580g
ModelMaxon OD9Pro+

FREE 2-DAY SHIPPING VIA FEDEX ON ALL NEW PRODUCTS!

Used products will ship for 8.95 via Fedex 2-Day

All in stock orders placed before 3pm EST will ship same day and all orders placed after the cutoff will ship the next business day. If you need an order immediately, please let us know and we’ll try our best to accommodate your request. Just shoot us an email: shoreguitar@gmail.com.

**Please note we use Fedex flat rate envelopes but if you’d prefer a box we will accommodate your request for an additional fee. Email us BEFORE you place your order to request a box.   


You may also like


Recently viewed